TPO Roofing Services in Dallas, TX
Is your flat or low-slope roof leaking, bubbling, or showing bare spots? Worried a worn-out roof could lead to costly damage inside your building?
At Dallas Roof Replacement Pros, we specialize in TPO roofing systems for commercial properties and flat-roof homes in the Dallas–Fort Worth area. Whether you need a full TPO roof replacement or a new TPO system for a build-out, we design and install durable roofs that handle Texas heat, storms, and UV exposure.
If you’re looking for a long-lasting, energy-efficient roofing solution for your flat or low-slope roof, TPO is one of the best options available—and it’s one of our core specialties.
What Is TPO Roofing?
TPO (Thermoplastic Polyolefin) is a single-ply roofing membrane commonly used on:
- Commercial buildings
- Industrial facilities
- Retail centers and offices
- Multi-family and flat-roof residential properties
It comes in large rolls that are mechanically fastened or adhered to the roof deck and then heat-welded at the seams to form a waterproof, seamless layer.
TPO is popular in Dallas because it’s:
- Highly reflective (helps keep buildings cooler)
- Lightweight but tough
- Resistant to UV, chemicals, and punctures
- Relatively quick to install compared to some other systems
When to Consider a TPO Roof
You may want to consider TPO roofing if:
- Your current flat or low-slope roof is near the end of its life
- You’re planning a new construction project or tenant improvement
- Your energy bills are high and you want a more reflective roof
- You’ve had ongoing leak issues with other materials
- You need a low-maintenance, code-compliant commercial roof
TPO is often a great fit for owners who want a balance of cost, durability, and energy savings without going to a heavier or more complex system.
Our TPO Roofing Services
TPO Roof Installation
For new buildings or major renovations, we install complete TPO roofing systems designed around your structure’s needs. Our process includes:
- Roof inspection and measurement
- Evaluation of deck condition and drainage
- Selection of TPO thickness and insulation setup
- Professional installation with heat-welded seams
- Final quality and water-shedding checks
We pay special attention to transitions, penetrations, and edges, where most flat roof issues begin.
TPO Roof Replacement
If your existing flat roof is failing, we can replace it with a new TPO system. Typical replacement steps include:
- Removing or preparing the old roofing material
- Inspecting and repairing the roof deck
- Improving drainage and slope where possible
- Installing insulation and TPO membrane
- Sealing all seams, terminations, and accessories
A properly installed TPO replacement roof can offer many years of reliable performance, even under intense Dallas sun and frequent storms.
How We Install TPO Roofing
Every roof is different, but most TPO projects follow a similar structure.
1. Inspection and Planning
We start by walking the roof and identifying:
- Existing leaks and problem areas
- Condition of the deck and insulation
- Drain locations and water flow paths
- Roof penetrations (vents, HVAC, skylights, etc.)
Based on what we find, we recommend the TPO thickness, attachment method, and insulation layout that make the most sense for your building and budget.
2. Substrate Prep and Insulation
A TPO roof is only as good as what’s under it. We:
- Repair damaged decking
- Install or replace insulation to improve energy performance
- Make sure the surface is clean, secure, and ready for membrane
Proper preparation helps prevent future leaks and extends the life of the system.
3. TPO Membrane Installation
We roll out the TPO membrane in sections, then:
- Mechanically fasten or fully adhere it to the substrate
- Overlap the seams and heat-weld them using specialized equipment
- Install flashings and edge details at walls, curbs, and parapets
Heat-welding creates a strong, monolithic bond that’s more reliable than glued seams.
4. Flashing and Details
The details are where good roofs are made. We carefully:
- Flash around HVAC units, pipes, and vents
- Treat inside and outside corners to shed water correctly
- Reinforce high-traffic or high-stress areas
This is critical to avoiding leaks over the long term.
5. Final Inspection and Clean-Up
When the installation is complete, we:
- Inspect seams, edges, and penetrations
- Check drainage and water flow
- Clean the site and remove all debris
We walk the roof with you when possible, explain what we’ve done, and answer any questions about care and maintenance.
Benefits of TPO Roofing for Dallas Properties
Reflective and Energy Efficient
TPO comes in light colors that reflect sunlight rather than absorbing it. In our hot North Texas climate, this can:
- Help reduce cooling loads
- Improve comfort in top-floor spaces
- Support code and efficiency goals
For many commercial owners, the energy savings are an important part of the decision.
Durable and Weather-Resistant
TPO roofing is engineered to stand up to:
- UV exposure and extreme heat
- Wind uplift when properly fastened
- Moderate foot traffic and routine maintenance visits
With quality materials and professional installation, it offers dependable performance for years.
Flexible and Lightweight
Because TPO is relatively light and flexible, it’s:
- Easier to work with on large, open roofs
- Less stressful on older structures than heavier systems
- Compatible with many different deck types and insulation setups
This flexibility makes it a practical choice for a wide variety of commercial and flat-roof buildings.
Simple to Maintain
Routine inspections and basic care go a long way with TPO. Many issues can be spotted and addressed early, helping you avoid major disruptions.
Our Process: From Estimate to Finished Roof
We work hard to keep the process straightforward and transparent.
Step 1: Consultation and Roof Evaluation
We visit your property, listen to your concerns, and evaluate your existing roof. We discuss:
- Current issues and leak history
- Your long-term plans for the building
- Budget and timing
Then we determine if TPO is the right fit and explain your options clearly.
Step 2: Detailed Written Proposal
You receive a written proposal outlining:
- Scope of work
- Materials to be used
- Estimated timeline
We walk you through each line so you understand what you’re getting and why it’s recommended.
Step 3: Scheduling and Preparation
Once you’re ready to move forward, we set a start date that works with your operations. We discuss access, safety, and any special considerations for your tenants or business.
Step 4: Professional Installation
Our crew arrives on time, follows safety standards, and keeps the job site as clean and organized as possible. We keep you updated on progress so there are no surprises.
Step 5: Final Walk-Through
When the job is complete, we perform a final quality check and walk the roof with you when possible. We review what was done and share tips for basic care and monitoring.
Why Dallas Roof Replacement Pros for TPO?
Choosing a contractor for a flat or low-slope roof is a big decision. Building owners and managers in Dallas trust us because:
- We have focused experience with TPO systems
- We understand how Dallas weather affects flat roofs
- We take time to get the details right, not just the visible areas
- We communicate clearly from start to finish
We treat each project like it’s our own property, aiming for a roof you can count on—not just for the next storm, but for many seasons to come.
Is TPO Right for Your Roof?
TPO roofing is a strong option if you:
- Have a flat or low-slope roof in need of replacement
- Want a bright, reflective surface for better efficiency
- Need a system that’s relatively quick to install
- Prefer a balance of cost, durability, and performance
If you’re unsure whether your building is a good candidate, we’re happy to take a look and give straightforward feedback. Our goal is to match you with the roofing solution that truly fits your property, not just sell you a product.
Get a TPO Roofing Estimate in Dallas
If you’re considering TPO roofing for your commercial building or flat-roof property in the Dallas area, Dallas Roof Replacement Pros is ready to help.
Contact us today to schedule an on-site evaluation and get a clear, written estimate for your TPO roofing project.